Art-Tech R/C Hobby Uživatelský manuál

USER S MANUALRemote control radio gliderRemote control radio glider

If the parts of the ASK-21 Glider were damaged, please contact the dealer to purchase new components.Notes8Operating Manual for the radio

Transmitter particular introduce9Reverse switch on rud derReverse switch on thrott leReverse switch on elevatorReverse switch on aileronPower swit

104. Pulling out the short-circuit plug.the indicator light turns flash. The rece iver get into working mode.1. Press the switch for frequency bind, t

Left stickpushing upSpeed upSpeed downNose turn leftNose turn rightnose turn down/ descendingNose turn up/ ascendingThe body incline to leftThe body i

50mm12Inspection and adjustment before flying1. Switch for power supply: Install 8 cells dry batteries in the transmitter according to

No. : 51049Cabin set13Spare parts listNo.: 51019Fuselage setNo.: 51029Main wing setNo.: 51039Horizontal tail planeNo.: 35023Servo setNo.: 3302A20A Bru

www.art-tech.com

Contents中文部分 产品以实物为准,若有更改,恕不另行通知。 Specifications may change without notice, please refer to the real one for configuration. 2010.07Technical Par

Thank you for choosing this classical model airplane of Art-Tech. This model is generally for beginner, intermediate and experienced h

6) Please keep away from the blade when you put on the battery. No matter if the transmitter is on or off, the flying system may turn on

3Flying adjustmentTips for flying1) Don’t fly in bad weather2) Take off: please take off against the wind. The can only take off by hand-

4Notice1. Do not insert any conductive into the cooling hole when power is on, or damage will be caused to the charger.2. While charging is in process

Assembly51. Take out left&right wings,and the avigation aluminium bar.2.Insert the aluminium bar into the steel tube of the left wing and right wi

Assembly69.Install the canopy10.Trimming power of each servo's area.11.The airplane is fully installed,ready to fly.

7Trouble shootingProblemCauseSolutionMotor does not run1. Battery is not fully charged. 2. The battery of transmitter is not sufficient3. Check the wi